1. High fire resistance

The multi-component inorganic foam material belongs to the A1 grade fireproof material, which has good fire resistance, and the fire resistance reaches more than 1000 ℃, which fully meets the requirements of the fire isolation belt and the Ministry of Housing and Urban-Rural Development Gongtongzi [2009] No. 46 document.

2. High thermal insulation

Since the closed cell ratio of the multi-component inorganic foam material is >95, the high closed cell ratio reduces the convective heat transfer, which is a prerequisite for high thermal insulation. The thermal conductivity of HT foam concrete fireproof exterior wall insulation board is basically the same as that of polystyrene board, which can meet the needs of building thermal insulation.

3, the strength is relatively good, not easy to break

This product has high compressive, flexural and strength indicators, and has achieved relatively uniformity. It is not easy to be broken during use and transportation, and meets the integrity of fire resistance.

4. Lightweight

Lightweight is another advantage of our products. When the density is 100-300kg/m3, it can fully meet the requirements of various indicators of the fire isolation belt. At the same time, the cost can be greatly reduced.

5. Harmless

The raw materials of the multi-component inorganic foam fireproof isolation belt for external wall insulation will not burn at high temperature and will not release toxic gases, and it is an environmentally friendly building material.

6. Long life

The service life of the multi-component inorganic foam fireproof isolation belt for external wall insulation is more than 50 years, which can keep pace with the service life of the building.

7. Good water resistance

Since the multi-component inorganic foam material belongs to the silicate material, the water resistance is very superior.

8. Good interface

Since this material is a porous material and is homogeneous with mortar and wall surface, the interface is very good. During the construction process, it does not need to be anchored like cotton and other thermal insulation materials, and it can be directly pasted.

9. Energy saving

It can be filled with industrial, agricultural, minerals, and waste residues to achieve waste reduction and emission reduction; no harmful gas emissions, no matter the construction process or use process, there is no impact on the environment like the release of gas from foam materials; it will not be dismantled due to repeated insulation The waste will pollute the environment; it will not cause serious threats to the environment and human life due to the burning of thermal insulation materials; there is no damage to human skin and respiratory tract caused by the flying dust of inorganic thermal insulation materials such as mineral wool; after decades or centuries, after Crushed can be refilled and reused without causing pollution to the environment, enabling continuous production.